Servo question time!

Post here if you have any questions about your CEN prodcut or need assistance on getting them going.

Moderator: CEN Racing

Servo question time!

Postby ROLEX on Fri Aug 16, 2013 11:31 pm

I've made it to the center of the 5sc thus getting to the servos.
Now my throttle servo is a traxxis:


I'n not sure if this is the servo that came with the kit or if the kit was purchased as a no electronics. At any rate, that is what is in there now. Thoughts?

As far as the steering servo goes the one that is in there now has no external marking. I pulled it out and noticed that one of the screws was loose so you know I had to take it all apart! Upon inspection the only two markings I could find were:



two questions:
is there any way to id this servo as I would like to get a 2nd one. The spot for teh 2nd steering servo is empty and I think it would greatly improve performance to have another.

2nd. When I reassembled the servo I barely tightened the screws and it caused the servo to bind up. Is that just an indication of the quality or am I doing something wrong? literally I threaded the screws in till the heads just bearly made contact with the plastic and them another 1/8 of a turn to snug.

As always thanks in advance for any and all help you guys may provide
It's all a matter of perspective
User avatar
CEN Troop
CEN Troop
Posts: 10
Joined: Sun May 26, 2013 7:51 pm
Location: Indiana

Re: Servo question time!

Postby JAT on Sat Sep 27, 2014 5:46 pm

This is the servo you can buy them for around $10 each . I would recommend staying away from cheap servos.
User avatar
Site Admin
Site Admin
Posts: 1028
Joined: Sun Apr 27, 2008 9:35 pm
Location: Australia

Return to Customer Service / Tech Support

Who is online

Users browsing this forum: No registered users and 0 guests