Base Carburetor Settings, read before asking: All Models.

Post here if you have any questions about your CEN prodcut or need assistance on getting them going.

Moderator: CEN Racing

Re: Base Carburetor Settings, read before asking: All Models.

Postby brad08 on Wed Sep 29, 2010 7:46 pm

Very nice mod for a racing car. Good info. Thanks. Might as well do that kind of settings. I'll try it one of these days.
brad08
CEN Rookie
CEN Rookie
 
Posts: 1
Joined: Wed Sep 29, 2010 7:44 pm

Re: Base Carburetor Settings, read before asking: All Models.

Postby wblagg09 on Mon Mar 07, 2011 10:58 pm

hey if you get this can you please help i dont know wich post to reply to so ill do it here , i have a matrix c-1 it starts and stall when i give it gas im thinking the tuning is outa wack how do i set the needles to 0 so i can try and tune it also how should i adjust trim ???? please help ima newmie
wblagg09
CEN Rookie
CEN Rookie
 
Posts: 1
Joined: Mon Mar 07, 2011 10:51 pm

Re: Base Carburetor Settings, read before asking: All Models.

Postby gentleon on Sun Jun 17, 2012 2:31 pm

Help please, I have just restored a fun factory MT2 and have had it running all Ok, problem is as soon as I put it under any pressure it stalls. I am sure it is the carb settings, how can I find out what the factory settings are for idle and high needles (turns out from closed) appreciate any help!
gentleon
CEN Rookie
CEN Rookie
 
Posts: 2
Joined: Sun Jun 17, 2012 1:33 am

Re: Base Carburetor Settings, read before asking: All Models.

Postby JAT on Fri Jun 29, 2012 3:54 am

Hi sounds like its to rich. You need to lean out the hispeed needle.

http://www.youtube.com/watch?v=OeHQmmXT ... re=related

this short vid will help
User avatar
JAT
Site Admin
Site Admin
 
Posts: 1028
Joined: Sun Apr 27, 2008 9:35 pm
Location: Australia

Previous

Return to Customer Service / Tech Support

Who is online

Users browsing this forum: No registered users and 0 guests