Base Carburetor Settings, read before asking: All Models.

Post here if you have any questions about your CEN prodcut or need assistance on getting them going.

Moderator: CEN Racing

Re: Base Carburetor Settings, read before asking: All Models.

Postby Dan on Tue Aug 26, 2008 7:37 am

Oh! ok duh! never thought of moving that screw, thanx
Back in the states, in a place called Lawton. Who has heard of it!?
Dan
CENsational
CENsational
 
Posts: 957
Joined: Sat Jul 05, 2008 9:23 pm
Location: Lawton, Oklahoma U.S.

Re: Base Carburetor Settings, read before asking: All Models.

Postby magnumnx on Wed Nov 05, 2008 5:14 pm

can someone send me a diagram of the bottom top and flush things and maybe explain what that is because i have no clue and i want to fine tune my car. and one question, how fast should the car be moving if it is tuned correctly. because whenever i tune my car to not die when i hold the break it moves really fast out of idle.
magnumnx
CEN Troop
CEN Troop
 
Posts: 38
Joined: Sun Oct 12, 2008 12:36 pm

Re: Base Carburetor Settings, read before asking: All Models.

Postby etivac13 on Mon Dec 15, 2008 2:17 am

CEN Racing wrote:The bottom-end adjustment for this car is facing the back of the car- opposite side onf the slider



picture would be nice... ;)
etivac13
CEN Rookie
CEN Rookie
 
Posts: 9
Joined: Mon Oct 06, 2008 12:31 am

Re: Base Carburetor Settings, read before asking: All Models.

Postby new guy on Mon Dec 29, 2008 12:37 pm

when adjusting the needles your top end needle do u have to screw it right in first then sure it out 3 turns or is it 3 turns from where it sits?
instead of cuttin g 2 holes 1 in front and 1 in back is it possible on an impreza body would it be of if you cut out the vent in the bonnent and in the roof or must you do the 2 big hole.
help is very much appreciated as im just new to this stuff
answers are gratly appriciated
marty
new guy
CEN Rookie
CEN Rookie
 
Posts: 4
Joined: Sun Dec 28, 2008 4:52 am

Re: Base Carburetor Settings, read before asking: All Models.

Postby Dan on Mon Dec 29, 2008 2:41 pm

You still need the hole on the front.
Back in the states, in a place called Lawton. Who has heard of it!?
Dan
CENsational
CENsational
 
Posts: 957
Joined: Sat Jul 05, 2008 9:23 pm
Location: Lawton, Oklahoma U.S.

Re: Base Carburetor Settings, read before asking: All Models.

Postby demoniam on Tue Dec 30, 2008 1:43 pm

Anyone have the info for the carb on an SP1?
demoniam
CEN Troop
CEN Troop
 
Posts: 17
Joined: Fri Dec 26, 2008 11:28 am

MG10 ENGINE??

Postby Shrpshootermg10 on Sun Jan 04, 2009 9:50 pm

NX15 IS THAT THE ENGINE THAT IS IN THE MG10?
Shrpshootermg10
CEN Rookie
CEN Rookie
 
Posts: 2
Joined: Sun Jan 04, 2009 9:26 pm

MG10 PERFORMANCE SETTINGS????

Postby Shrpshootermg10 on Sun Jan 04, 2009 10:06 pm

i just got a mg10 and my little brother messed all the settings up while i was on holidays so i have to redo it all can anyone tell me how many turns i have to do when everything is tight as in all the screws all all the way anticlockwise. any help would be much appreciated.
Shrpshootermg10
CEN Rookie
CEN Rookie
 
Posts: 2
Joined: Sun Jan 04, 2009 9:26 pm

Re: Base Carburetor Settings, read before asking: All Models.

Postby nakedlunch on Wed Feb 11, 2009 4:18 am

"Top end: 3 ½ - 4 ½ turns out"
from where? out from flush? or out from completely down screwed position?
i think you first need to turn the needle completely down/in and then turn it 3 1/2 to 4 1/2 turns out, right? but if so i don't know why to take 2 different reference points (flush for LSN and down for HSN)!?

Image

Image
nakedlunch
CEN Troop
CEN Troop
 
Posts: 38
Joined: Wed Jan 21, 2009 8:13 am
Location: Vienna, Austria (Europe)

Re: Base Carburetor Settings, read before asking: All Models.

Postby cptelecomm818 on Fri Mar 27, 2009 2:28 pm

HELP!!!!!!!!!!!!! I downloaded and read before asking, lolol. I am a newbie!!!! I have a Genesis and now were the screws are but dont know how many turns out from all the way in is 1mm gap for idle? I know this is a dumb ? but please help. What is the perfect settings for max performance for top, bottom, idle?
cptelecomm818
CEN Rookie
CEN Rookie
 
Posts: 7
Joined: Fri Mar 27, 2009 2:09 pm

PreviousNext

Return to Customer Service / Tech Support

Who is online

Users browsing this forum: No registered users and 0 guests