Page 2 of 2

Re: CEN Racing USA Support Line - Online Now

PostPosted: Wed Mar 05, 2014 9:19 pm
by 911codeman
Hello, I need a new Head Button (combustion Chamber) part #G70357-19 for a CEN GST 7.7. The picture of the part in your online store looks nothing like the part in my parts catalog or the Button that came off the truck. The one pictured in your online store has the same part # but I assure you that it will not fit this truck. Please help!!
By the way, been running RC cars for 25 years and had the GST the last 4.... This is my favorite and my Pride and Joy. I named him "Stomper" but My Kids call him Stinky.

Re: CEN Racing USA Support Line - Online Now

PostPosted: Fri Mar 07, 2014 6:40 am
by CEN Racing
Hi

Thank you for being a loyal customer.

The picture on the website is a picture of an engine head button from .16 engine, infact, we used the same picture for all head buttons on all engines.

Anyhow, as long as you order the part number G70357-19 from the website, you will get the correct item. Dont worry.

Re: CEN Racing USA Support Line - Online Now

PostPosted: Mon Mar 24, 2014 3:59 pm
by mattb
hello I have a 2002 GS Storm RTR and am looking for a rear inter bulk head. Any help would be greatly appreciated. please post a link if you know of any.

Re: CEN Racing USA Support Line - Online Now

PostPosted: Thu Mar 27, 2014 4:22 am
by CEN Racing
Just search using GS Part numbers. Here is the link

http://cenracing.shptron.com/c/gs-racing-parts

Re: CEN Racing USA Support Line - Online Now

PostPosted: Wed Apr 30, 2014 7:51 pm
by treeguy
seem not o keep my 7.7 running so I can break it in what should I try

Re: CEN Racing USA Support Line - Online Now

PostPosted: Fri Aug 01, 2014 3:31 am
by des076
Hello I have a Cen 7.7 nitro which i think is a .46 ?? 3 speed forward and reverse, I got it new unused and have run it all in and now put 2.5litres through it but can not get it to change gears not matter how hard i rev it, can u tell me what to set the 2nd and 3rd gears to to get this to happen. They both have the silver spring in them and i have taken them out as evenly as i can I have 2nd at 7 turns out and 3rd at 9 and still nothing

CEN Racing wrote:Image

Sales Department

Tel: +1-626-537-9004
EST: 11 am - 7 pm
PST: 8 am - 4 pm
sales@cenracing.com

Image
Customer Service
Tel : +1-626-537-9006
EST: 11 am - 7 pm
PST: 8 am - 4 pm
customerservice@cenracing.com

Re: CEN Racing USA Support Line - Online Now

PostPosted: Fri Aug 01, 2014 3:33 am
by des076
Hello I have a Cen 7.7 nitro which i think is a .46 ?? 3 speed forward and reverse, I got it new unused and have run it all in and now put 2.5litres through it but can not get it to change gears not matter how hard i rev it, can u tell me what to set the 2nd and 3rd gears to to get this to happen. They both have the silver spring in them and i have taken them out as evenly as i can I have 2nd at 7 turns out and 3rd at 9 and still nothing

CEN Racing wrote:Image

Sales Department

Tel: +1-626-537-9004
EST: 11 am - 7 pm
PST: 8 am - 4 pm
sales@cenracing.com

Image
Customer Service
Tel : +1-626-537-9006
EST: 11 am - 7 pm
PST: 8 am - 4 pm
customerservice@cenracing.com

Re: CEN Racing USA Support Line - Online Now

PostPosted: Sun Aug 03, 2014 9:33 am
by CEN Racing
Hi

Thank you for choosing CEN Racing.

If the 2nd speed is set incorrectly, whether too early or too late, the 3rd speed will never shift. However, if you never hear the 2nd speed shift, its probably because its set to shift either instantly when the truck takes off or its set to never shift

Please review the attachment and adjust the shift point accordingly.

P.S. You also have to use 30% fuel and set the engine correctly for it to produce enough power/RPM. 30% is a MUST

Re: CEN Racing USA Support Line - Online Now

PostPosted: Mon Aug 04, 2014 10:05 am
by cencanadian
You will never get the 3rd gear to engage using the silver springs you need the Gold springs Part no GS308 cost about $5 on ebay