easy way to remove the pinion gears for the gst ?

Post pictures / videos of your ridez here.. CEN ONLY :)

Moderator: CEN Racing

easy way to remove the pinion gears for the gst ?

Postby fate024 on Fri Feb 17, 2012 12:55 pm

looking to remove the pinion gears on my gst ...is there any easy method or tool to do this ? i have broken 2
clutchbells and they are hard to come by ...any help ty tonyb
fate024
CEN Rookie
CEN Rookie
 
Posts: 2
Joined: Fri Feb 17, 2012 11:42 am

Re: easy way to remove the pinion gears for the gst ?

Postby _JAT_ on Sat Feb 18, 2012 3:30 am

Put the bell in the oven at around 160 Degrees for about 10-15 minutes. This will loosen the locktite.Now make sure you have some oven gloves cause its going to be just a tad hot on the fingers.While still warm hold the bell with some plyers or a vice.Then take a multi wrench and turn the spur off.
_JAT_
CEN Moderator
CEN Moderator
 
Posts: 453
Joined: Mon Mar 31, 2008 1:58 am
Location: Australia

Re: easy way to remove the pinion gears for the gst ?

Postby chase73 on Sat Mar 03, 2012 7:49 am

:) i got my pinion gears of with a little heat as well but, have new question what locktight is used to hold them on once i get new ones ??????
chase73
CEN Rookie
CEN Rookie
 
Posts: 1
Joined: Fri Mar 02, 2012 2:15 pm


Return to Picture / Video

Who is online

Users browsing this forum: No registered users and 0 guests

cron